Beverage Air Undercounter Reach-In

Cabinet
– Daily Wipe Down
– Weekly Interior Clean

Wipe down gaskets

*Interior Cleaning*
– Remove all loose food particles from the inside walls, floor, door liner and ceiling.
– Scrub all interior surfaces and door gaskets with a warm (100F to 110F) detergent solution and a soft scrub brush.

1. Unplug unit from power supply.
2. Remove the Phillips head screws at the top of the panel.
3. Once the screws have been removed the you can lower the panel.

Please note the electrical cord will still be connected to the panel.

4. Examine condenser surface, if dusty, brush and vacuum the dust and lint from the surface of the
coil. Brush up and down to avoid damaging the fins. Use care to not disturb the wires connected to the controller.

Note: If the coil is greasy, the coil will need to be cleaned with coil cleaner and that should be left to an experienced
technician.

5. After the condenser is clean, return the grille panel to the unit.
6. To reinstall the rear panel line up the bottom of the panel to the bottom of the unit keeping the screw holes lined up on the panel and on the unit.
7. Reinstall the Phillips head screw.

Note: Air filters are not recommended as they restrict the flow of cooling air.