| Weekly | - Clean with only a damp piece of cloth and neutral soap each external and internal surface and dry them with a clean soft cloth.
- *Never use flammable or abrasive products. The unit must never be cleaned with water jets.*
|
|---|
| Monthly | - Clean condensers – Step-by-Step guideline below.
- Disconnect power to the unit.
- Take off the front lower grill assembly by removing the two (2) screws in the top corners.
- Clean off accumulated dirt from the condenser coil(s) using a vacuum and/or a damp rag.
- Replace the grill assembly.
- Connect power to the unit and verify that when required the condensing unit(s) are running.
- If you cannot remove the dirt adequately, please call your refrigeration service company.
- Cleaning Drain Lines
- Schedule a Preventative Maintenance Appointment
- Cleaning the Drain Lines without an Appointment
- 2a. The drain lines can also be accessed by removing the bottom panel from the inside of the unit. Both holes for the drain lines can be located.
- 2b. Obstructions can be removed either by compressed air or nitrogen, or physically removing the obstruction with a drain cleaner.
|
|---|
| Annually | - Preventative Maintenance Appointment Recommended
|
|---|
